Made for the joints that depend on it.
Sprung floors, performance vinyl, ballet barres, portable mirrors, tap and sports flooring. Measured, manufactured and installed to the room, with Tarkett's 10-year warranty on Tarkett-surfaced floors and dance vinyl.
Plan your studio, room by room.
A guided way to map the sprung floor, vinyl, barres and mirrors to your space, so you can shape the fit-out before you brief us. In development now.
Measured, made,
installed, supported.
Measured
We start with the room. The sprung floor is measured to your studio and cut to fit at installation, and vinyl, barres and mirrors are sized to the space, so the surface fits wall to wall and the equipment suits the dancers using it.
Made
Sprung floors, ballet barres, studio mirrors and the portable tap floor are manufactured in our own workshop. Made in Australia, and built for daily timetables - a floor that holds its spring and a barre that stays true through class after class.
Installed
Floors, vinyl and sports flooring are laid by our crews. Portable mirrors are supplied Australia wide; wall-mounted mirrors are installed to AS 1288 by our glazier in Melbourne. Floors and barres are made to go down without a tradesman if you'd rather fit them yourself.
Supported
Tarkett's 10-year warranty on Tarkett-surfaced floors and dance vinyl, and a team that knows the kit because we made it. When a surface reaches the end of its life, we resurface over the existing sub-structure rather than rebuilding the floor - quoted separately, since normal wear sits outside the warranty.
A floor takes years of class. Tarkett-surfaced floors and dance vinyl carry Tarkett's 10-year warranty, backed by a team that knows the kit because we made it. Replacement vinyl and top surfaces are stocked for the day a surface wears through, quoted at the time, since normal wear sits outside the warranty.
Six ranges, one studio sorted.
Own-brand floors, barres, mirrors and tap step, made in our workshop, alongside performance vinyl and sports flooring we supply and lay. Pick a range to see the detail.
What do Own-brand / Supplied & laid mean?
The two chips, defined once: Own-brand ranges - sprung floors, ballet barres, studio mirrors and the portable tap floor - are engineered and manufactured in our own workshop. Supplied & laid ranges - dance and performance vinyl and Multiflex M sports flooring - are distributed and installed by us as the Australian distributor of choice.
The floor the class trains on.
Modular plywood panels on an EPDM rubber shock-pad matrix, force-tested and made in Australia. Four finish tiers, from a paint-ready base to a stage-ready impact board, engineered in-house and now frequently specified by architects and builders.
Explore sprung floorsThe top surface dancers feel.
Dancefloor, acoustic and omnisport vinyl, selected, supplied and installed for ballet, tap, flamenco and stages. Rolled or cut to size and laid over a sprung or solid base by our own crews.
Explore dance vinylMade for the barre.
Floor and wall mounted, with portable barres for home or studio. Powdercoated steel with a 43 mm Tasmanian Oak rail, every bracket load-rated in our own workshop. Made in Australia to take years of class.
Explore ballet barresSee the line, correct the line.
Portable and wall-mounted. 6 mm silver glass with polished edges and custom cut-outs on request. Portable mirrors go Australia wide; wall-mounted mirrors are installed by our glazier in Melbourne. Made in our workshop.
Explore studio mirrorsA tap floor that gives back.
A fully sprung portable tap surface on our own sprung floor system. Real force reduction, not a board on a mat, and it protects the floor underneath. Made in Australia and built to travel.
Explore the tap floorOne floor, every code.
A fully floating, semi-sprung multilayer timber system, joint-free to any size, for halls, gyms, schools and multi-sport complexes. Supplied and laid by our own crews, Australia wide.
Explore sports flooringEvery floor, barre and mirror is measured to your room - floor panels are a standard manufactured size, cut to fit at installation - then delivered Australia wide. Not sure where to start? Plan your studio with the room configurer, or tell us about the space.
Four finishes,
one sprung base.
Every sprung floor is the same structure underneath: plywood panels on an EPDM rubber shock-pad matrix, independently tested for force reduction and fire rated. What changes is the top. Pick the finish for the way the floor gets used.
The base
The sprung floor itself, with a paint, seal or DIY top. Force reduction, relocatable, goes down without a tradesman.
For ballet
Solo plus dancefloor vinyl in black or grey. The grip and slip ballet and pointe ask for.
For tap too
Solo plus iQ Granit Acoustic vinyl, self-healing and tap-suitable. The all-rounder for mixed-discipline studios.
Stage-ready
Solo plus a paintable Weathertex impact board. The standard for Australian commercial theatre.
Every floor is measured to the room - panels are a standard manufactured size, cut to fit at installation - and supplied with custom joining clips, wave board, side ramps, screws and a moisture membrane. The floor is fire rated, made in Australia, and engineered in-house to protect feet, ankles, shins, knees and hips through years of class. Tarkett-surfaced tiers carry Tarkett's 10-year warranty on the surface. Explore sprung floors →
Already working in your world.
Whether it's a studio, a conservatoire, a school hall or a multi-sport complex, the floor and the fit-out change with the room. Find the approach built for your space.
The floors the companies dance on.
Our sprung floor system was engineered in-house, it is laid in The Australian Ballet's rehearsal studios, and our floors, barres and mirrors are specified by ballet schools, conservatoires and studios around the country - the Australian Conservatoire of Ballet, the Melbourne Conservatoire of Ballet and Geelong Arts Centre among them. When the people teaching the next generation choose the surface, it tells you the floor holds up.
See our installs
A long-established range, now part of TSA.
Sprung dance floors and studio equipment, engineered in-house and made in Australia. Sprung floors, ballet barres, studio mirrors and the portable tap step are built in our own workshop; dance vinyl and Multiflex M sports flooring are supplied and laid as the Australian distributor of choice. Same craft, now backed by the scale of TSA. The range still carries the Show Works name, and the full line sits on the Show Works dance equipment pages.
The bits people always ask.
If we missed yours, send it through. We'll get back to you.
Every floor is measured to your studio and installed to fit. Panels are manufactured to a standard size and the floor is cut to fit your room at installation, so the surface fits wall to wall, and barres and mirrors are sized to suit the space and the dancers using it.
A sprung floor is the structural base: plywood panels on an EPDM rubber shock-pad matrix that returns energy and protects feet, ankles, shins, knees and hips. Performance vinyl is the top surface that goes over a sprung or solid base to give dancers the right grip and slip. Many studios run performance vinyl on top of a sprung floor for the full package.
Sprung floors, ballet barres, studio mirrors and the portable tap floor are manufactured in our own workshop. Dance and performance vinyl and Multiflex M sports flooring are distributed and installed by us as the Australian distributor of choice.
Yes. Floors, barres and mirror frames are made in our workshop and delivered Australia wide. Installation of sprung floors, vinyl and sports flooring is available across Queensland, New South Wales, Victoria, South Australia and Western Australia, Adelaide and Perth included. Portable mirrors are supplied Australia wide; wall-mounted mirror installation to AS 1288 is available in Melbourne and Adelaide.
We've got the floor.
You've got the class.
Measured, made, installed and supported - Australia wide. One conversation, made to your room.